Sato S., Iwakuma M., Nakamura K., Yoshida K., Miyazaki H., Kawagoe A., Masuda Y., Miura S., Sasa H., Kawasaki G.
Ключевые слова: rotating machines, motors synchronous, armature, coils racetrack, current sharing, HTS, REBCO, tapes, strands, numerical analysis, experimental devices
Sato S., Iwakuma M., Yoshida K., Miyazaki H., Kawagoe A., Masuda Y., Miura S., Sasa H., Kobun A., Kawasaki G.
Ключевые слова: rotating machines, motors synchronous, HTS, REBCO, coils, armature, coated conductors transposed, cables, current distribution, design
Sato S., Iwakuma M., Nakamura K., Yoshida K., Miyazaki H., Kawagoe A., Masuda Y., Miura S., Sasa H., Kobun A.
Sato S., Iwakuma M., Yoshida K., Miyazaki H., Kawagoe A., Miura S., Sasa H., Kobun A., Takashima A., Onamyuda Y.
Ключевые слова: HTS, YBCO, tapes, coils, magnets, design parameters, refrigerator, design, ac losses, modeling, numerical analysis
Iwakuma M., Yoshida K., Miyazaki H., Kawagoe A., Yoshida T., Miura S., Sasayama T., Sasa H., Okade Y.
Izumi T., Iwakuma M., Miyazaki H., Kawagoe A., Hase Y., Konno M., Yoshida T., Noda K., Miura S., Sasamori Y., Sasayama T., Sasa H., Honda H., Shutoh M.
Ключевые слова: rotating machines, generators, design, design parameters, HTS, GdBCO, tapes, cooling technology, nitrogen liquid , ac losses, flux density, distribution, modeling, numerical analysis
Ключевые слова: HTS, YBCO, coated conductors, tapes, stacked blocks, ac losses, flux density, frequency dependence, measurement technique, experimental results
Iwamoto A., Mito T., Hirano N., Kawagoe A., Baba T., Chikumoto N., Takahata K., Yanagi N., Hamaguchi S., Takada S., Onodera Y., Otsuji M., Kawanami R.
Lee S., Izumi T., Aoki Y., Hasegawa T., Sato S., Iwakuma M., Yoshida K., Tomioka A., Kawagoe A., Nakamura M., Yamamoto K., Hase Y., Konno M., Yoshida T., Hasuo S., Miura S., Sasamori Y., Sasayama T., Sasa H., Honda H., Syutoh M., Umeno T.
Izumi T., Iwakuma M., Yoshida K., Tomioka A., Kawagoe A., Yamamoto K., Konno M., Doi Y., Yoshida T., Miura S., Ozaki K., Sasayama T.
Ключевые слова: aviation application, HTS, REBCO, coated conductors, coils saddle, rotating machines, design, motors, design parameters, losses, efficiency
Ключевые слова: rotating machines, HTS, REBCO, YBCO, coated conductors, coils saddle, motors, winding configurations, ac losses, design parameters, modeling, numerical analysis, flux density, distribution
Mito T., Mito T., Hirano N., Hirano N., Kawagoe A., Kawagoe A., Takahata K., Takahata K., Yanagi N., Yanagi N., Hamaguchi S., Hamaguchi S., Onodera Y., Onodera Y., Nagamoto N., Nagamoto N.
Ключевые слова: power equipment, transformers, HTS, Bi2223, tapes multifilamentary, winding configurations, measurement technique, quench, ac losses, experimental results
Ключевые слова: HTS, Bi2223, coils, ac losses, measurement technique, experimental results
Ключевые слова: power equipment, transformers, HTS, Bi2223, tapes, winding techniques, defects, measurement technique, coils, quench, measurement setup
Ключевые слова: HTS, measurement technique, tapes, ac losses, coils solenoidal, Bi2223
Mito T., Matsushita T., Otabe E.S., Tanaka K., Kawagoe A., Sumiyoshi F., Yanagi N., Kawabata S., Wakuda T., Matsushima K., Yoshidome Y., Kuichi M.
Ключевые слова: MgB2, tapes, wires round, coils, fabrication, design parameters, ac losses, transport currents, experimental results, winding configurations, installation
Ключевые слова: HTS, Bi2223, coils, quench properties, control systems, measurement setup, measurement technique, experimental results
Mito T., Matsushita T., Otabe E.S., Kiuchi M., Kawagoe A., Sumiyoshi F., Yanagi N., Kawabata S., Takahashi M., Wakuda T., Wakabayashi Y., Matsushima K., Yoshidome Y.
Izumi T., Shiohara Y., Hayashi H., Iwakuma M., Yamada Y., Okamoto H., Tomioka A., Kawagoe A., Sumiyoshi F., Suzuki K., Konno M., Owa M.
Ключевые слова: HTS, YBCO, coated conductors, coils model, ac losses, coated conductors multifilamentary, comparison, experimental results, power equipment
Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yokota M., Sumiyoshi F., Hemmi T., Morita Y., Ogawa H., Kuge A., Tsukuda S., Nakamura A.
Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yamauchi K., Yokota M., Sumiyoshi F., Hemmi T., Maekawa R., Morita Y., Ogawa H., Kuge A., Nakamura A.
Ключевые слова: SMES, LTS, NbTi, coils pulsed, conduction cooled systems, uninterruptible power supply , test results, power equipment
Hirano N., Kawagoe A., Sumiyoshi F., Nagaya S.(Shigeo.Nagaya@chuden.co.jp), Kawabata S.
Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yamauchi K., Yokota M., Sumiyoshi F., Hemmi T., Maekawa R., Morita Y., Ogawa H., Kuge A.
Ключевые слова: LTS, NbTi, coils pulsed, uninterruptible power supply , SMES, conduction cooled systems, design parameters, test results, power equipment
Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yokota M., Henmi T., Sumiyoshi F., Morita Y., Ogawa H., Yamamuro H.
Ключевые слова: LTS, NbTi, Rutherford cables, coils pulsed, conduction cooled systems, heat transfer, uninterruptible power supply , SMES, prototype, test results, power equipment
Nagaya S., Sumiyoshi F., Kawagoe A.(kawagoe@eee.kagoshima-u.ac.jp), Hirano N.(hirano.naoki@chuden.co.jp), Kawabata Y.
Ключевые слова: HTS, Bi2212, interstrand contact resistances, Rutherford cables, SMES, power equipment
Hayashi K., Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Henmi T., Seo K., Sumiyoshi F., Maekawa R.
Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yamauchi K., Yokota M., Henmi T., Seo K., Sumiyoshi F., Maekawa R., Morita Y., Ogawa H.
Ключевые слова: SMES, uninterruptible power supply , LTS, NbTi, coils pulsed, cryocoolers, winding techniques, design parameters, prototype, power equipment
Hayashi K., Mito T., Iwakuma M., Chikaraishi H., Kawagoe A., Okumura K., Abe R., Baba T., Yamauchi K., Yokota M., Henmi T., Seo K., Sumiyoshi F.
Ключевые слова: SMES, uninterruptible power supply , conduction cooled systems, LTS, NbTi, Nb3Sn, HTS, coils pulsed, design parameters, power equipment
Hayashi K., Mito T., Miyoshi K., Iwakuma M., Chikaraishi H., Okumura K., Abe R., Baba T., Sumiyoshi F., Kawagoe A.(kawagoe@eee.kagoshima-u.ac.jp), Hemmi T., Ushiku T.
Ключевые слова: SMES, uninterruptible power supply , coils pulsed, winding techniques, conduction cooled systems, LTS, NbTi, ac losses, experimental results, power equipment
Ключевые слова: HTS, Bi2223, tapes, coils solenoidal, ac losses, measurement technique, power equipment
Mito T., Hirano N., Sumiyoshi F., Kawagoe A.(kawagoe@eee.kagoshima-u.ac.jp), Kawashima T.
Mito T., Sumiyoshi F., Kawagoe A.(kawagoe@eee.kagoshima-u.ac.jp), Kawashima T.
Ключевые слова: LTS, NbTi, ac losses, stability, design, Rutherford cables, ac losses, quench energy, experimental results, power equipment
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.